If you have measured your bearing, enter sizes below:
If you still can't find the bearing you need, contact us and we'll do all we can to locate your bearing - just give us a call:
+852 6935 6196
sales@lsbearing.com
THANK YOU...for the bearings..really great servise..will buy again and will recomended as well
thanks
centroom
Click here for more customer comments
TMBH 1
Portable induction heater weighing only 4,5 kg
• Portable, lightweight, high efficiency heater suits bearings with an inner diameter ranging from 20 to 100 mm (0.8 to 4 in.), and a maximum weight of 5 kg (11 lbs)
• Equipped with temperature and time control and automatic demagnetisation
• Supplied in a carrying case
• Wide operating voltage: 100–240 V/50–60 Hz
TIH 030m
Small induction heater with a 40 kg bearing heating capacity
• Compact lightweight design; just 21 kg (46 lbs), facilitating portability
• Capable of heating a 28 kg (62 lbs) bearing in just 20 minutes
• Supplied standard with three yokes, allowing bearings with a bore diameter from 20 mm (0.8 in.) up to a maximum weight of 40 kg (90 lbs) to be heated
• Available in two versions: 230 V/50–60 Hz and 100–110 V/50–60 Hz
TIH 100m
Medium induction heater with a 120 kg bearing heating
capacity
• Capable of heating a 97 kg (215 lbs) bearing in less than 20 minutes
• Supplied standard with three yokes, allowing bearings with a bore diameter from 20 mm (0.8 in.) up to a maximum weight of 120 kg (265 lbs) to be heated
• Swivel arm for large size yoke
• Available in two versions: 230 V/50–60 Hz and 400–460 V/50–60 Hz
TIH 220m
Large induction heater with a 300 kg bearing heating capacity
• Capable of heating a 220 kg (480 lbs) bearing in just 20 minutes
• Supplied standard with two yokes, allowing bearings with a bore diameter from 60 mm (2.3 in.) up to a maximum weight of 300 kg (660 lbs) to be heated
• Sliding arm for large size yoke
• Available in two versions: 230 V/50–60 Hz and 400–460 V/50–60 Hz.
TIH L series
Extra large induction heater with a 1 200 kg bearing heating
capacity
• Using just 20 kVA of electrical power, the TIH L series can heat large bearings up to 1 200 kg (2 600 lbs)
• Bearings and work pieces can be heated vertically or horizontally
• Compact design allows the TIH L series heaters to be easily transported by forklift
• Available in two versions: 230 V/50–60 Hz and 400–460 V/50–60 Hz.
• Available with two different operating areas
• Read our Privacy Policy • Your access to and use of this Website is conditional on your acceptance of these Terms and Conditions of Use © Bearing leading 2014
• Bearing leading, Unit 5, Stonerow Way, Parkgate, Rotherham, S60 1SG